04.11 Further Reading
Open full view...Categories: Structural Systems
Introduction
The documents listed below have been classified as follows
- Key References
- CWCT Publications
- British Standards
- Other Standards
- Other References
Some but not all of of these documents are referred to in the sections of this package. Key references generally cover a significant proportion of the subject matter of the package in greater detail than presented here. Other references generally relate to a small part of the subject matter of the package; they range from short papers to text books. No attempt has been made to compile a comprehensive bibliography but where a literature search has been carried out for other purposes the list of other references is extensive. British Standards include European and ISO Standards adopted as British Standards. It should be noted that British Standards are updated from time to time and that in this updating process they are being replaced by European Standards. The Standards listed may not necessarily be the most up to date version. The current status of Standards can be checked using the BSI online catalogue at www.bsi.org.uk . Other Standards includes Building Regulations, standards published by other national standards organisations and standards and guidance documents produced by recognised societies and institutions.
CWCT Publications
CWCT, 1996, Standard for curtain walling, 2nd edition, Centre for Window and Cladding Technology, University of Bath, 56pp.
CWCT, 1996, Test methods for curtain walling, Centre for Window and Cladding Technology, University of Bath, 32pp.
CWCT, 1996, Guide to good practice for facades, Centre for Window and Cladding Technology, University of Bath, 44pp.
CWCT, 1998, Standard for walls with ventilated rainscreens, Centre for Window and Cladding Technology, University of Bath, 56pp
CWCT, 1998, Standard for testing of ventilated rainscreens Draft for development, Centre for Window and Cladding Technology, University of Bath, 20pp.
CWCT, 1999, Standard for slope glazing systems, Centre for Window and Cladding Technology, University of Bath, 96pp.
British Standards
BS 5950, Structural use of steelwork in building, British Standards Institution.
BS 6262, 1982, Code of practice for glazing for buildings, British Standards Institution.
BS 6399, Loading for building,
Part 1, 1996, Code of practice for dead and imposed loads,
Part 2, 1995, Code of practice for wind loads,
Part 3, 1988, Code of practice for imposed roof loads, British Standards Institution.
BS 8118: Structural use of aluminium, Part 1, 1985, Code of practice for design, British Standards Institution.
BS 8200, 1985, Code of practice for design of non-loadbearing external vertical enclosures of buildings, British Standards Institution.
BS 5950, Structural use of steelwork in building, British Standards Institution.
BS 6262, 1982, Code of practice for glazing for buildings, British Standards Institution.
BS 6399, Loading for building,
Part 1, 1996, Code of practice for dead and imposed loads,
Part 2, 1995, Code of practice for wind loads,
Part 3, 1988, Code of practice for imposed roof loads, British Standards Institution.
BS 8118: Structural use of aluminium, Part 1, 1985, Code of practice for design, British Standards Institution.
BS 8200, 1985, Code of practice for design of non-loadbearing external vertical enclosures of buildings, British Standards Institution.
Other Standards
HMSO, 1992, The Building Regulations 1991, Approved Document A, Structure, HMSO Publications.
HMSO, 1992, The Building Regulations 1991, Approved Document B, Fire safety, HMSO Publications.
HMSO, 1991, The Building Regulations, 1991, Approved Document K, Stairs, ramps and guards, HMSO.
Other References
SCI, 1992, Publication 101 Curtain wall connections to steel frames, Steel Construction Institute.
SCI, 1994, Steel Designer’s Manual, Blackwell Scientific Publications.