Installing MillMax/VP-Harmonizer Software
Open full view...Categories: Installing MillMax
Install MillMax Software
DO NOT INSERT DONGLE
Download MillMaxInstall202X zip files to desktop and unzip. Do not unzip the file named MillMaxFiles2020.zip. Click on the file named MillMaxInstall2020.exe. NOTE: You may have to right click and "Run as Administrator" if prompted. The window below will open. Make sure all on the clicked buttons match this photo (you can toggle English to Metric is that is what you will use). Click on Harmonizer or VPHarmonizer depending on your subscription level (VP Harmonizer is standard). Click Automatic Stackup Namingfor File Naming Preference. Select the correct DAQ unit you are using. SIM5 Module (MS 485B39) is for all MillMax kits. Click on the "Install MillMax" button.
If you are installing MillMax over an existing SpeedCast, MetalMax TXF or BlueSwarf Data Collector installation, it will use your existing databases.
Click “I Accept”
If this message appears, click “Yes”
Click OK, then the “Close” button