Troubleshooting MillMax

• Practice keeps saying Hit Harder
• Odd Looking Depth of Cut Number (e.g. 0.000E+000)
• The buttons on MillMax screen are overlapping.
• Can't to get measure to accept any hits, always getting red arrows.
• Measurement shows repeated red arrows up or down
• Practice worked but Measure does not respond.
• Getting a lot of noise on the measurement
• Stuck in Y-Axis Measurement
• Very Generic FRF on DC Screen
• Dashboard is All Green on Speed
• Surface GO Tablet is stuck.
• On a ball endmill the Accuracy and Surface Finish gages are blank.
• Will not publish Dashboard (Publish DCC)
• Dashboard speed dial is all red or all green, power shows zero, SLE and CDD gages are blank.
• On Dashboard Power shows Infinity.
• Dashboard will not show a width and depth of cut on the endmill graphic. Just shows a vertical line,
• Installing drivers for old black box kits.
• Calibration Failed Warning
• Tapping a small endmill and get persistent double hits.
• Tapping a small endmill and get persistent "Hit Harder" warnings.
• What happens if I don't have a dongle?
• Databases did not load with new install of SpeedCast.
• Testing Your Kit's Hardware
• Trying to update dongle and get a corrupt file message.
• The first things to check for if you are having problems with Dashboards
• Dashboard won't work on iPad or iPhone
• What you will see if you are missing key data and try to generate a Dashboard
• Issue with some Feed Mill designs
• Customer's current tool is stable but the tap-test and Dashboard say it is in the red.
• How do I tell if my dongle has expired?
• Calibrating a Dashboard
• What about BlueSwarf?
• Dashboard issues with a Negative Rake Milling Cutter
• What does poor coherence do?
• What if I have the wrong tool geometry setting?
• I select and item (machine, toolholder, tool or material) and it does not save to the file.
• A user is colorblind, how will they use a Dashboard?
• Detecting that an accel was mounted backward.
• ERROR MESSAGE: All channels were out of range, you may have a bad DAQ card.
• ERROR MESSAGE: Hardware Lock Error!
• ERROR MESSAGE: This data file is not configured to allow export functions
• ERROR MESSAGE: MIllMax cannot publish the Dynamic Cutting Calculator for artifact measurements
• I select a machine toolholder or tool in Search, but it is not saved.
• The graph on the MillMax home page is blank
• The Accuracy (CDD) and Surface Finish (SLE) gages are blank.
• Sending a file to support
• Really Poor Coherence
• The light on the Interface (DAQ) unit is off
• Adjusting Process Damping on Indexable Cutter
• Cannot Open Dashboard sent in an email
• Why does my measurement have a 20 kHz bandwidth?
• Edited MillMax file not saving
• How do I know if I have a file with no tap-test measurement?
• Only allows taps in X-Direction.
• Try to open Dashboard in a browser and get text
• Calibrate Dashboard for Trochoidal Milling
• Check that the measurement direction is correct
• After tapping in X Axis, it does not allow me to tap in Y.
• Alternatives to wax for mounting accelerometer
• Can MillMax measure knee or bed mills?
• When I edit a file it becomes blank, losing the tap-test measurement
• The MillMax Icon is missing from desktop
• Opening old Flash-Based Dashboards
• My file has no measurement (tap-test).